There’s nothing like the smell of fresh pine to put you in the holiday spirit. Although I can appreciate the convenience of a faux tree and other pre-fabricated decorations, it’s not Christmas in our home without the real thing. That’s why part of my holiday tradition has been making my own wreath.
I save the frame and basic components from year to year, so all I need to make a new one is the fresh greens. And here’s where I’m going to let you in on my little holiday secret: I get them from the local big-box-store tree lot for free. (If you’re lucky enough to live in a wooded area where pine branches are plentiful, this may also be an option for you, but in our suburban neighborhood we’re limited to the tree lot.)
If there’s a lot near you with a cutting area, you can usually find plenty of cast-off branches waiting to be thrown out. But you can save them from that fate (at least until the holidays are over). I politely ask one of the employees if I can take some off their hands. I’ve gotten a few confused shrugs, but I’ve also gotten enthusiastic responses and offers to help carry them to the car. No one has ever said no or tried to charge me.
As a bonus, you might also find some stumps cut from the tree trunks, which are great for all kinds of holiday art projects (check out what fellow GeekMom Lisa Tate does with hers). I make sure to get enough greens so that there’s some left over after the wreath is finished. Add some candles and a few shiny baubles and you’ve got a lovely centerpiece. If you’re not going to use them right away, make sure to put them in a bucket of water to keep them fresh. I forgot to do that this year and ended up with a few crunchy branches. Fortunately, there were still some good ones in the bunch.
But back to the wreath. It’s simple to make and infinitely customizable. You’ll need a frame (available at most craft stores), paddle wire in 24 gauge (or coiled wire from a home improvement store, which is less expensive and just as good), straight wire in 24 gauge or thinner, a pair of sturdy clippers, ribbon, and, of course, the decorations.
This year I made two wreaths, since our neighbor mentioned wanting one. I stuck with a traditional look for her–pine cones (recycled from years past), ornaments, and ribbon. For our wreath I decided to give it a geeky twist by incorporating pieces from last year’s Lego Advent Calendar. You can use anything you have handy to personalize your wreath, including action figures, toys, circuit boards, hardware, whatever strikes your fancy. Since the elements are wired on, not glued, they won’t be damaged and are easy to remove when you take the wreath down.
Before you put your wreath together, cut down the branches to a manageable size. They should be somewhere between six inches and a foot long. Make sure the wood is flexible and not too thick. Don’t worry if they’re a bit unruly; you can always cut them down later. I use a combination of noble and douglas fir, because that’s what I usually find in the bin and I like the contrasting textures.
Start by laying the frame on a flat surface and attaching the end of the wire to it. Next, begin layering the branches around the frame in one direction, overlapping them slightly as you go around and alternating the different kinds of greens.
Wrap the wire around each branch as you place it, securing it to the frame. Leave it loose enough so you can tuck each new branch under the last wire you wrapped. You may need to go around a few times until the frame is completely covered.
The greens can be a little wild, so don’t be afraid to trim away any branches that are sticking out. Try and keep your wreath to an even, circular shape. To add in additional branches, just tuck them under the wire. If you’ve wrapped it well enough, they should stay in place. Once I’m happy with the fullness of the base, I like to do one more pass with the wire to keep everything in line. If the frame you’re using doesn’t have a hanger, make one out out of ribbon or a piece of jute twine.
Next, it’s time for the main bow. You can use a pre-made bow, tie a shoelace bow, or make your own following the picture instructions below.
Once the bow is placed, it’s time to decorate your wreath. This is also where you can get your kids involved, picking the decorations and placing them around. Using the thinner, straight wire, attach the ornaments around the wreath with equal spacing all around. Wire them where it will be the least conspicuous. It’s okay to tie your Minifig around its neck, it won’t look like it’s choking from far away. I added some festive elements to the wreath alongside the Lego figures to give it a nice holiday look.
That’s pretty much it. Pick a theme, grab some items from your display shelf or your storage bins, and start wiring away. The beauty of this project is that you can do it all over again, year after year, using the same frame and supplies. Change the design or keep it the same, it’s up to you. Anyone who knocks on your front door will appreciate the festive, personalized touch.