3D printing is a tricky hobby to get into. Once you get the hang of it, though, it can be a lot of fun. Unfortunately, there is a steep learning curve to it, so we are here to give you our tips for keeping your sanity as a newbie at 3D printing.
Some printers are less expensive but require more maintenance. Some are more expensive and require a little tinkering with. Pick your poison carefully, as they say. If you are unsure what printer to choose, check out your library or local Makerspace and see what they have and play around.
When you think it’s level… level it again. And make sure the bed and nozzle are hot when you are leveling.
The excitement of getting your printer will quickly fade if you don’t have the patience to deal with the possible issues. I’ve had my bed stop heating out of nowhere with no indication as to why. Patience will help you solve the problems without wanting to throw your printer in the nearest trash compactor.
Don’t mod your printer from the start. Start off with it at stock and work up from there. It lets you get to know your printer at its bare basics.
It’s a hobby. Be ready for your prints to fail more often than succeed in the beginning, and be patient when making setting changes. Also, ask the right forum for help. For the Creality 3D Printers, there’s an amazing Facebook group with members always at the ready to help.
Be careful about where you are going to place your printer. You want it to have plenty of space to move the bed as well as a stable surface that won’t shake. If you plan to print ABS you will need an enclosure. You also want a place away from prying hands and furry friends that might disrupt your print. As much as you love Fluffy, if he/she disturbs a print in its 60th hour you won’t be liking them very much.
There is a steep learning curve and it’s okay to get frustrated. Watch the right YouTube channels for your printer and remind yourself it’s a hobby. Breathe. Walk away. Come back with fresh eyes and start again. Once you understand the quirks of your own printer you will be able to better adjust the settings to suit your needs.
I have a Creality CR-10 Mini and in my stockpile of parts. I have a spare Bowden tube, acupuncture needles (to clean a clogged nozzle), and nozzles in various sizes at the ready.
I’ve heard two really good ways of storing filament. The first is in an airtight container with silica gel packets to pull away moisture. The second is getting a Food Saver and sealing your filament in plastic with a few silica gel packets inside. The most important part of storing your filament though is away from moisture. Tip! One way to tell if your filament has moisture in it is to bend a piece and see if it snaps. If it snaps, it has some moisture in it.
This rule mostly applies if you are in a forum. It’s easy to just ask a question when you need an answer right away, but if you search the group you may find 10 other people who had the same problem.
If your prints are failing, a good place to start is the Print Quality Troubleshooting Guide by Simplify3D. It breaks down the most common issues with pictures and steps to fix it.
Special thanks to the users of the Creality CR-10 Facebook group and MakerFX for giving me their tips.
This post was last modified on March 7, 2019 12:48 pm
There are hundreds if not thousands of different types of video game controllers on the…
Other paranormal investigators have attempted to exorcise this haunted manor but failed—will you solve the…
Concerts and music festivals aren't always accessible—or affordable—so turn the opportunity to watch via streaming…
Zoe Saldana is a mom like us, working to teach her sons empathy through gaming…
A few years ago, I was able to attend a Dark Sky Party sponsored by…
GeekMom Elizabeth discusses the nine things she is most anticipating in the newest 'Bridgerton' season.